Compressor Solenoid Valve – Normally Open (KOM A)

What is Compressor Solenoid Valve?

The compressor solenoid valve is the part of the compressor that controls the air flow. This valve is used to manage the compressor’s air compression and control the air pressure. It is usually controlled by an electromagnetic force and can open and close the airflow. In this way, the compressor system can adjust the air pressure regularly, increasing or decreasing the air pressure as needed.

Where Is Compressor Solenoid Valve Used?

Compressor solenoid valve is widely used in air compression systems. For example, it can be found in household air conditioners, air conditioning systems and automobile air conditioners used to control air quality. This valve can also be used in air compressors and some pneumatic systems.

Solenoid Valves are manufactured in two types as normally closed (to open the closed valve when the coil receives energy) and normally open (to close the open valve when it receives energy from the coil).

Normally Open State Operating System

Normally Open Solenoid valve initially allows the passage of fluid. In order to close the valve, the coil moves with the electric current coming to the coil, pushing the core down and closing the mouth of the orifice hole, and in this case, the pressure inside increases gradually and pushes the diaphragm down and closes the orifice through which the fluid passes. In a short time, the pressure spreads homogeneously on the diaphragm and the pressure higher than the pressure of the fluid prevents the fluid from lifting the diaphragm, so the valve is in the closed position. All this happens in a very short time. Our product is designed to get the best efficiency.

General Features

• Gasket: Viton
• Sleeve: Brass
• Body: Brass
• Core: Stainless
• Temperature: -10 / +150 °C
• Coil: Socket

Suggestions

Mount the solenoid valve so that the coil is up. In the installation, such as a strainer before the solenoid valve, etc. use filters. We use more durable diaphragm and gasket material for high temperatures
Please specify your diaphragm and gasket request for high temperature in your orders.

Things to Consider When Choosing a Solenoid Valve:

• The coil should be selected in accordance with the operating voltage (AC-DC). Protection and insulation should be provided according to the place where it will be applied. (Electricity turns on when air comes in, and turns off again when you cut off the electricity)
• In the line or system you will use, min. and max. pressure values are very important in the selection of the valve.
• The quality and temperature of the fluid is a direct factor in the selection of the valve.
• The direction of the fluid and the arrow mark on the body are in the same direction and attention should be paid to the assembly.
• Since the solenoid valve does not function as a check valve, the fluid flows back at reverse pressures. In these cases, installing a check valve after the solenoid valve is correct for the connection.
• The line to which the valve is attached must be free of impurities.

You can visit our “Solenoid Valve” page for more detailed information on the subject or to find solutions to the problems you are experiencing.